Electronic Modules

piezo sensor-Gold

30,00 EGP
  • High Sensitivity: Accurately detects vibrations, pressure, or impacts.
  • Gold-Plated Electrodes: Enhanced conductivity and corrosion resistance for reliable performance.
  • Wide Frequency Response: Ideal for applications in sound and vibration detection.
  • Compact & Durable: Thin, flexible design with long operational life.
  • Versatile Use: Suitable for musical instruments, alarms, medical devices, and industrial monitoring.
Add to cart

PL2303 USB to TTL Converter Module

75,00 EGP
  1. Adopt imported controller PL2303HX, which can stabilize the flash with high speed
  2. 500mA self-recovery fuse for protection
  3. Two data transmission indicator can monitor data transfer status in real time
  4. Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
  5. The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside,
  6. so that the board won’t be burnt down by material shortcut.
  7. Electrostatic package ensures the board will not be damaged before use
Add to cart

PN532 NFC RFID Read / Write Module V3 Kit

250,00 EGP
  1. Module Size: 42.7mm x 40.4mm x 4mm
  2. Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes
  3. Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version
  4. Built in PCB Antenna, with 5cm~7cm communication distance
  5. On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
  6. Work as RFID reader/writer
  7. Work as 1443-A card or a virtual card
Add to cart

POT10K Ohm 3Pin 15mm Shaft Potentiometer

8,00 EGP

✅ 10K ohm 3-pin potentiometer
✅ 15mm shaft length for easy handling
✅ Smooth ~270° rotation
✅ Through-hole mounting type
✅ Versatile and widely used component

Add to cart

Programmer CH341A

400,00 EGP
  1. USB interface
  2. With CH341A chip
  3. Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
  4. With 24/25 status indicator lamp
  5. Support USB to TTL conversionSupport 24EEPROM and 25 SPI flash 8pin/ 16pin chip
  6. Recognize 25 series chip automatically
  7. Supports download STC series procedure of single chip
  8. SPI pin to support expanding the utility
  9. STC microcontroller supports a full range of program download
  10. Support expanding the utility by SPI pin
  11. With SOP8 SOP16 to DIP8 converter board
Add to cart

PS2 Joystick Module Breakout Sensor

40,00 EGP
  • Analog joystick with two potentiometers for X and Y axes
  • Includes a push-button switch when pressing the joystick down
  • Compatible with Arduino, Raspberry Pi, and other microcontrollers
  • Easy to interface via analog input pins
  • Compact breakout board design with standard pin headers
  • Ideal for robot control, game controllers, and navigation projects
Add to cart

SIM800L Quad-Band GPRS GSM Module with Antenna

310,00 EGP
  1. Quad-band GSM/GPRS module (850/900/1800/1900 MHz)

  2. Low power consumption with sleep mode (~1mA)

  3. Supports voice, SMS, and GPRS data

  4. UART interface with AT command set

  5. Compact size with antenna connector

  6. Suitable for IoT and embedded applications

Add to cart

Solar cell 2.5V

40,00 EGP
  • 2.5V Output Voltage suitable for low-power electronics
  • Compact Size ideal for small DIY and educational projects
  • Environmentally Friendly renewable energy source
  • Easy to Connect with solder pads or wires
  • Perfect for Charging Small Batteries or Powering Microcontrollers
Add to cart

Solar Cell Panel – 18V 5W Polycrystalline

325,00 EGP
  • 18V Output Voltage suitable for small electronics and charging
  • 5W Power Rating for efficient energy conversion
  • Polycrystalline Silicon for durability and stable performance
  • Compact and Lightweight for portable solar applications
  • Ideal for DIY Solar Projects, Lighting, and Battery Charging
Add to cart

Solar Panel 1W 5V

150,00 EGP
  • 1 Watt power output at ~5V
  • Compact and easy to integrate
  • Renewable and clean solar energy source
  • Ideal for small-scale solar and battery charging projects
Add to cart

ST-Link V2 Programmer for STM8/STM32

Original price was: 290,00 EGP.Current price is: 250,00 EGP.
  • Supports SWD protocol for STM32 microcontrollers

  • Supports SWIM protocol for STM8 microcontrollers

  • USB interface for easy PC connectivity

  • Compatible with STM32CubeIDE, STVP, ST-Link Utility, Keil, IAR

  • Firmware upgradable for future updates

  • LED status indicator for operation feedback

  • Includes Dupont jumper wires for flexible connections

Add to cart

TDA2030A 6-12V 18W Audio Amplifier Module

55,00 EGP
  • Based on TDA2030A high-performance audio amplifier IC
  • Mono channel output delivering up to 18W of clear audio power
  • Low harmonic distortion for high-quality sound reproduction
  • Includes horn/speaker socket for easy connection
  • 10K adjustable potentiometer for volume control
  • Onboard power indicator LED
  • Supports 6V–12V DC input power supply
  • Ideal for DIY audio projects, speakers, and embedded audio systems
Add to cart

TM1637 4-Digit LED Display Module with Clock for Arduino

75,00 EGP
  1. Driver Chip: MAX7219
  2. Input Voltage: 3.7 to 5.3 V
  3. Input Current: 30 mA
  4. Display Dimensions: 42x24x12 (LxWxH) mm
Add to cart

TP4056 5V 1A 18650 Battery Charger Module with Protection “TYPE-C USB

30,00 EGP
  1. Input interface: Type C
  2. Current Protection: Yes
  3. Charging mode: Linear charging.
  4. Current: 1A adjustable.
  5. Charge precision: 1.5%.
  6. Input voltage: 4.5V-5.5V.
  7. Full charge voltage: 4.2V.
Add to cart

USB ASP AVR Programming Device for ATMEL Processors

150,00 EGP
  1. Compatible Chips:
    1. ATMega Series
    2. Tiny Series
    3. Classic Series
    4. CAN Series
    5. PWM Series
Add to cart

USB LED Light Flexible 5V 1.2W

20,00 EGP
  • Powered by 5V USB – plug-and-play with any USB port
  • 1.2W Power Consumption – energy-efficient lighting
  • Flexible Gooseneck Design – easy angle adjustment
  • Bright LED Illumination – ideal for laptops, reading, or workspaces
  • Compact & Portable – great for travel or everyday use
Add to cart

USB Mini Humidifier DIY Kit with Mist Maker and Atomizer

150,00 EGP
  • Customizable Assembly: Build your own humidifier.
  • USB Powered: Easy connection to any USB port.
  • Efficient Mist Maker: Delivers fine mist for improved air quality.
  • Adjustable Output: Control mist levels as needed.
  • Compact & Portable: Perfect for small spaces and travel.
  • Quiet Operation: Ideal for use in quiet environments.
Add to cart

WiFi Serial ESP-01 Breakout Board

40,00 EGP
  • Breadboard-friendly design for easy prototyping.
  • Full access to all ESP-01/ESP-01S pins.
  • Built-in 3.3V regulator for stable power.
  • Compact, lightweight, and portable.
  • Compatible with ESP-01 and ESP-01S modules.
  • Ideal for IoT and Arduino projects.
Add to cart

WS2811 Addressable RGB LED 12V

150,00 EGP
  • Individually addressable RGB LEDs
  • Built-in WS2811 driver IC
  • Operates on 12V DC – perfect for long strips
  • Single-wire serial communication
  • 24-bit color control (16.7 million colors)
  • Works with Arduino, ESP32, Raspberry Pi
  • Ideal for lighting effects, signage, and DIY
Add to cart

Ekosta Electronics Egypt

Ekosta Electronics Egypt | Leading Supplier of Arduino, Raspberry Pi, Motor Drivers & Electronics Components | Premium Spare Parts, Industrial Sensors & Robotic Kits | High-Quality Electronics at Competitive Prices | Fast Shipping & Expert Technical Support Across Egypt.