Shop

polly Micro Limit Switch SM Short Lever 3A 20×6 mm

10,00 EGP
  • Compact Size (20×6 mm) with short actuator lever

  • Rated 3A @ 250VAC/30VDC for moderate-power applications

  • Snap-Action Contacts for precise and reliable actuation

  • Versatile Mounting spots for secured placement

  • Ideal for End-Stops, Safety Switches, and Small Machinery

POT100K Ohm 3Pin 15mm Shaft Potentiometer

7,00 EGP

✅ 100K ohm resistance, 3-pin potentiometer
✅ 15mm shaft length for easy manual adjustment
✅ Smooth ~270° rotation
✅ Through-hole mountable
✅ Suitable for analog signal control

POT10K Ohm 3Pin 15mm Shaft Potentiometer

8,00 EGP

✅ 10K ohm 3-pin potentiometer
✅ 15mm shaft length for easy handling
✅ Smooth ~270° rotation
✅ Through-hole mounting type
✅ Versatile and widely used component

POT1K Ohm 3Pin 15mm Shaft Potentiometer

8,00 EGP

✅ 1K ohm 3-pin potentiometer
✅ 15mm shaft length for easy adjustment
✅ Smooth ~270° rotation
✅ Through-hole mount type
✅ Suitable for low-resistance applications

POT500K Ohm 3Pin 15mm Shaft Potentiometer

7,00 EGP

✅ 500K ohm 3-pin potentiometer
✅ 15mm shaft length for easy handling
✅ Smooth rotation, approx. 270°
✅ Through-hole mounting type
✅ Suitable for analog input adjustments

POT50K Ohm 3Pin 15mm Shaft Potentiometer

6,00 EGP
  • 🎚️ 50KΩ rotary potentiometer (3-pin)
  • 📏 15mm shaft length—fits common knobs and panels
  • 🔁 Smooth rotation for precise adjustment
  • ⚡ Perfect for voltage dividers and analog tuning
  • 🔊 Ideal for volume control, gain, and brightness adjustment
  • 🛠️ Easy solder pins—great for DIY and repairs
  • 📦 Panel-mount friendly for enclosures and control boxes
  • ✅ Reliable component for Arduino and analog projects

POT5K Ohm 3Pin 15mm Shaft Potentiometer

8,00 EGP

✅ 5K ohm 3-pin potentiometer
✅ 15mm shaft length for easy handling
✅ Smooth ~270° rotation
✅ Through-hole mounting
✅ Ideal for low-resistance variable control

Power Bank Module 1A

50,00 EGP
  • 🔋 Power bank module with 5V / 1A output
  • ⚡ Provides stable USB power for small devices
  • 🧠 Ideal for DIY power banks and portable battery projects
  • 🧩 Works with Li-ion/LiPo cells (حسب نوع الموديول)
  • 🛡️ Protection features: over-charge / over-discharge / short-circuit
  • 🔌 Easy wiring to battery + USB output
  • 📦 Compact PCB—fits داخل أي enclosure بسهولة
  • ✅ Great for Arduino/ESP32 projects needing portable 5V

Power Bank Module Single USB Type C 5V-1A

50,00 EGP
  • 🔋 Power bank module with single USB output
  • ⚡ 5V / 1A output for charging small devices
  • 🔌 USB Type-C input for easy charging/power connection
  • 🧠 Ideal for DIY power banks and portable battery packs
  • 🛡️ Built-in protection (over-charge / over-discharge / short)
  • 🧩 Works with 18650 Li-ion cells (with proper holder)
  • 📦 Compact PCB—easy to mount in enclosures
  • ✅ Great for projects needing stable 5V portable power

Pro Mini ATMEGA328P 5V/16M Blue

Original price was: 240,00 EGP.Current price is: 200,00 EGP.
  • Based on ATmega328P microcontroller
  • Operates at 5V, 16 MHz clock speed
  • Compact, small form factor (Blue PCB)
  • Compatible with Arduino IDE for easy programming
  • Low power consumption, ideal for embedded projects
  • Includes RAW and VCC power input pins

Programmer CH341A

400,00 EGP
  1. USB interface
  2. With CH341A chip
  3. Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
  4. With 24/25 status indicator lamp
  5. Support USB to TTL conversionSupport 24EEPROM and 25 SPI flash 8pin/ 16pin chip
  6. Recognize 25 series chip automatically
  7. Supports download STC series procedure of single chip
  8. SPI pin to support expanding the utility
  9. STC microcontroller supports a full range of program download
  10. Support expanding the utility by SPI pin
  11. With SOP8 SOP16 to DIP8 converter board

Propeller 75mm Pair CW/CCW Compatible for DC Motor

70,00 EGP
  • 🌀 75mm propeller pair: CW + CCW rotation
  • ⚙️ Compatible with small DC motors for DIY builds
  • 🔁 Matched pair for balanced thrust and stable performance
  • 📏 Size: 75mm—great for compact drones/fan projects
  • 🧩 Ideal for RC models, air propulsion, and experiments
  • 🛠️ Easy installation on suitable motor shafts/adapters
  • 💨 Efficient airflow design for better thrust
  • ✅ Perfect for robotics, STEM, and prototyping projects