Shop
Veko VR2025 3V Lithium Battery
30,00 EGP- 🔋 3V lithium coin cell battery (VR2025)
- ⚡ Stable voltage for small electronics and backup power
- 📏 Compact size: 20mm × 2.5mm
- 🧠 Ideal for RTC, memory backup, key fobs, and sensors
- ⏳ Long shelf life for standby/low-drain devices
- 🛡️ Reliable, leak-resistant construction
- ❄️ Works well across common operating temperatures
- ✅ Compatible replacement for VR2025-supported devices
Vertical Water Level Sensor Float Switch
100,00 EGP- 💧 Vertical float switch for water level detection
- 🔁 Simple ON/OFF output—acts like a basic switch
- 🧲 Magnetic reed switch inside for reliable triggering
- 🛠️ Easy tank mounting with vertical installation
- 🚰 Ideal for water tanks, sump pumps, and overflow protection
- 🔌 Works with Arduino/PLC using pull-up or pull-down wiring
- 🛡️ Corrosion-resistant design for long-term use
- ✅ Great for automatic filling/draining control systems
VL53L0X Laser Distance Sensor Module Black Version
Original price was: 300,00 EGP.270,00 EGPCurrent price is: 270,00 EGP.- Time-of-Flight (ToF) laser distance measurement for high accuracy
- Range: ~30mm to 2000mm with millimeter precision
- 940nm Class 1 IR laser – eye-safe and reliable in varying light conditions
- Fast response with low power consumption (~20mW)
- I²C interface for easy microcontroller integration
- Compact black PCB for easy mounting in projects
Voltage Detection Sensor Module 25V
30,00 EGP-
Measures DC voltages up to 25V
-
Provides 0–5V analog output for ADC input
-
Built-in 5:1 voltage divider circuit
-
3-pin interface: VCC, GND, OUT
-
Compact module with mounting holes
-
Compatible with Arduino, ESP32, Raspberry Pi, and more
Water Level Depth Detection Sensor for Arduino
30,00 EGP- Measures water level or depth using pressure or ultrasonic sensing
- Provides analog or digital output compatible with Arduino
- Easy integration with microcontrollers for real-time monitoring
- Suitable for tanks, wells, or reservoirs
- Durable and waterproof design for reliable use in wet environments
- Operates at 3.3V to 5V power supply
Water Pump R385 12VDC
250,00 EGP- 💧 R385 DC water pump powered by 12VDC
- ⚡ Strong water flow for DIY and small pumping systems
- 🚰 Ideal for fountains, aquariums, irrigation, and cooling
- 🛠️ Easy to integrate with tubing and simple wiring
- 🔁 Continuous operation suitable for long running use
- 📦 Compact size—fits tight spaces and enclosures
- 🧩 Works with relays/MOSFET drivers for controller projects
- ✅ Great for Arduino automation and water circulation setups
Water Pump R385 12VDC
250,00 EGP- Working voltage: DC 6-12V.
- Working current: 0.5-0.7A.
- Biggest Suction:2 M
- Inner Diameter:4 mm
- Outer diameter: 8 mm
- Lifecycle: up to 2500 H
Waterproof Ultrasonic Obstacle Sensor, Sensor with Separate Probe
450,00 EGP-
Measures distance from 250mm to 4500mm
-
Waterproof sensor probe separated from control board (2.5m cable)
-
High accuracy with 40kHz ultrasonic pulses
-
Easy-to-use trigger and echo pins for distance calculation
-
Low voltage and low power consumption
-
Strong anti-jamming capability
-
Suitable for wet and harsh environments
-
Ideal for obstacle avoidance, traffic control, security, and AI applications
WD Car Chassis Kit with Bluetooth Control – Bundle Package
1.300,00 EGP- Bluetooth Control – Wireless operation via HC-05 module using your smartphone
- Arduino Compatible – Seamlessly integrates with Arduino Uno for customization
- High-Capacity Power – Powered by 3×18650 batteries for long-lasting performance
- Efficient Motor Control – L298N H-Bridge enables precise speed & direction control
- Easy Assembly – Pre-mounted wheels, motors & hardware for fast setup
- Flexible Wiring – Includes Male-Male, Male-Female & Female-Female jumper wires
- Compact & Durable – Lightweight yet robust chassis for easy modifications
WiFi Serial ESP-01 Breakout Board
40,00 EGP- Breadboard-friendly design for easy prototyping.
- Full access to all ESP-01/ESP-01S pins.
- Built-in 3.3V regulator for stable power.
- Compact, lightweight, and portable.
- Compatible with ESP-01 and ESP-01S modules.
- Ideal for IoT and Arduino projects.
Wind Generator DC Motor ( dynamo )
300,00 EGP- It is a micromotor wind turbine generator.
- Ideal for teaching demo.
- Motor outer diameter: 24mm
- Motor shaft diameter: 2mm
- Motor length: 32mm
- Rated RPM: 200~6000rpm
WS2811 Addressable RGB LED 12V
150,00 EGP- Individually addressable RGB LEDs
- Built-in WS2811 driver IC
- Operates on 12V DC – perfect for long strips
- Single-wire serial communication
- 24-bit color control (16.7 million colors)
- Works with Arduino, ESP32, Raspberry Pi
- Ideal for lighting effects, signage, and DIY
WS2812 Addressable RGB LED Strip 60leds/m DC12v
170,00 EGP-
Individually addressable WS2812B RGB LEDs (60 LEDs/m)
-
Full 24-bit color control for millions of colors
-
DC 12V operation for stable long runs
-
Flexible and cuttable for custom lengths
-
Compatible with Arduino, ESP8266, ESP32, Raspberry Pi
XF-25 Base Plate Mini Breadboard
100,00 EGP- 🧩 XF-25 mini breadboard base plate
- 📏 Designed to hold mini breadboards securely
- 🧲 Adhesive backing for easy mounting on desks/enclosures
- 🛠️ Keeps prototyping boards stable أثناء التجارب
- 📦 Compact size—perfect for small DIY projects
- 🔌 Helps organize wires and modules neatly
- 🧠 Great for electronics learning and quick tests
- ✅ Ideal accessory for Arduino and prototyping setups
XKC-Y25-V Non-Contact Water Liquid Level Sensor
400,00 EGP- Non-contact detection through container walls
- Works with non-metal containers .
- Sensitivity adjustable for better detection.
- Input Voltage: (InVCC) DC 5 ~ 24 V
- Power Consumption: 5mA
- Output Current: 1 ~ 100mA
- Communication: RS485
- Material: ABS
- Waterproof Performance: IP67
YF-S201 Water Flow Measurement Sensor with 1-30Liter/min Flow Rate – Black
220,00 EGP- Measures water flow from 1–30 L/min
- Built-in Hall effect sensor for pulse output
- Outputs ~2.25 ml per pulse
- 3-wire interface: 5V (Red), GND (Black), Signal (Yellow)
- Easy to install, compact design
- Requires calibration for accurate readings
- Ideal for water dispensing and basic flow monitoring
DIY Self Balancing Robot 3d printer
350,00 EGP✅ 3D printable chassis design
✅ MPU6050 + Arduino control
✅ PID balance logic
✅ Real-time motor control
✅ Perfect for STEM learning or robotics enthusiasts
