Shop
Mini wind turbine blade vertical ax micro generator blades set small high quality
60,00 EGP- 🌬️ Mini vertical-axis wind turbine blade set (micro generator)
- 🧩 Designed for small wind power and educational projects
- ⚙️ High-quality blades for smooth, stable rotation
- 💨 Works with low wind speeds for micro-generation experiments
- 🛠️ Easy to assemble and mount on small generator motors
- 🔋 Great for DIY renewable energy demos and STEM learning
- 📦 Compact set—ideal for small-scale outdoor/desktop testing
- ✅ Perfect for hobbyists, students, and prototype builds
MOC3063 Zero-Crossing Optocoupler – 600V Triac Driver for Safe AC Load Control
15,00 EGP- Zero-Crossing Detection – Ensures low-noise switching and reduced EMI
- 600V Peak Voltage Handling – Ideal for switching high-voltage AC loads
- Low Trigger Current – Operates with typical 10mA LED current
- Optical Isolation – Withstands up to 5300V RMS between input and output
- Safe AC Switching – Protects microcontrollers and PLCs from AC surges
- Compact DIP-6 Package – Easy PCB integration and through-hole mounting
- Reliable Load Control – Perfect for lamps, motors, heaters, and industrial systems
- Wide Operating Range – -40°C to +100°C for industrial-grade environments
Monocrystalline 110*136mm 12V 200mA Small Solar Cell
450,00 EGP- 12 volt 2-watt poly crystalline solar panel .
- High conversion speed, high-efficiency output.
- Excellent low light effect.
- High transmittance tempered glass.
- A unique technique to prevent water frozen within the deforming framework.
- Small Epoxy Solar Panels are simple to install or add to your existing product.
Mounting for DC Motor JGA25-370-CE 3D Printed
45,00 EGP-
Designed for 25mm JGA25-370-CE gear motors
-
High-quality PLA/PETG 3D printed construction
-
Pre-drilled 3mm mounting holes
-
Stable, low-profile design (~20mm height)
-
Easy alignment using motor faceplate and side screws
-
Ideal for robotics, pan-tilt, or DIY mechanical projects
MP3-TF-16P SD Card MP3 Module with Serial Port
150,00 EGP- Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
- 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
- Fully supports FAT16, FAT32 file system
- Maximum support 32G TF card
- Support U disk to 32G, 64M bytes of NORFLASH
- A variety of control modes are available. IO control mode, serial mode, AD key control mode
MPU-9250 9-DOF IMU Sensor Module – 3-Axis Gyroscope, 3-Axis Accelerometer & 3-Axis Magnetometer (I2C/SPI Interface)
700,00 EGP- 6-Axis Sensor: Combines 3-axis gyroscope and 3-axis accelerometer.
- Adjustable Sensitivity: Selectable ranges for both accelerometer and gyroscope.
- I2C Communication: Easy integration with Arduino, Raspberry Pi, and other microcontrollers.
- Low Power Consumption: Ideal for battery-powered applications.
- Compact Size: Easy to mount on various platforms.
- Wide Application Range: Perfect for motion tracking, robotics, drones, and wearable devices.
MPU6500 6-Axis Attitude Gyro + Accelerometer Sensor Module | I²C/SPI Interface
300,00 EGP- Accelerometer, Gyroscope
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- 9 DOF modules
MQ-135 Air Quality/Gas Detector Sensor Module For Arduino
100,00 EGP- Detects multiple gases: NH₃, benzene, alcohol, CO₂, NOₓ, smoke
- Provides analog and digital outputs
- Operates at 5V DC
- Adjustable sensitivity via onboard potentiometer
- Requires preheating (~24 hours) for accurate readings
- Compact and easy to integrate
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
85,00 EGP- Detects smoke, LPG, butane, hydrogen, and other combustible gases
- Provides analog and digital output signals
- Fast response and high sensitivity
- Compatible with Arduino and other microcontrollers
- Easy to calibrate and use in gas leak detection projects
- Operates at 5V power supply
- Ideal for safety and environmental monitoring systems
MQ-5 Gas Sensor Module
80,00 EGP- Detects LPG, methane, natural gas, and propane
- Dual output: analog and digital signals
- Operates at 5V with low power consumption
- Adjustable sensitivity via onboard potentiometer
- Fast response and recovery time
- Compact and easy to integrate
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
75,00 EGP- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
MT6701 14-Bit Magnetic Angle Sensor Module (AS5600 Alternative)
250,00 EGP- 🧲 14-bit magnetic angle sensor for precise rotation measurement
- 🎯 Smooth, high-resolution output (AS5600 alternative)
- 🧩 Ideal for knobs, robotics joints, gimbals, and encoders
- 🚌 I2C interface for easy connection to microcontrollers
- ⚡ Low power operation—great for portable/always-on systems
- 📐 Works with common diametric magnets for angle sensing
- 🛠️ Compact module—easy to mount and integrate
- ✅ Great choice for contactless angle sensing with long life
Multicolor 10 pin Dupont Flat Ribbon Cable (1 Meter)
25,00 EGP-
10 Individual Jumper Leads in a flat, ribbon format with 2.54 mm pitch
-
One-Meter Length for flexible routing in electronics projects
-
Multicolor Wires for easy signal identification and organization
-
Female-to-Female Connectors for quick plug-and-play with headers
-
Compatible with Breadboards & Microcontrollers like Arduino, Raspberry Pi
NEO-6M GPS Module with EPROM
500,00 EGP- Based on u-blox NEO-6M GPS chip
- Tracks up to 22 satellites on 50 channels
- High sensitivity: -161 dBm, low power: 45mA
- Built-in 25x25mm ceramic patch antenna
- Default baud rate: 9600
- EEPROM for saving settings & backup battery for faster lock
- TTL UART Interface: TX, RX, VCC, GND
- Supports GPS functions: Position hold, Return-to-Home, Waypoints
- Cold start: 38s, Hot start: 1s
- Compact: 30mm x 23mm module, 3mm mounting holes
- Ideal for drones, robots, navigation projects
NEO-M8N GPS Module with Ceramic Active Antenna
800,00 EGP- 📡 NEO-M8N GPS module with ceramic active antenna
- 🛰️ High-sensitivity positioning for fast, stable GPS lock
- 📍 Provides accurate location, speed, and time data
- 🔌 UART interface (and I2C/SPI depending on board)
- 🧩 Ideal for drones, robotics, trackers, and navigation projects
- ⚡ Works with common microcontrollers and flight controllers
- 📦 Compact module—easy to mount and integrate
- ✅ Great choice for outdoor positioning and timing applications
NJK-5002C Hall Effect Sensor – NPN NO 3-Wire Magnet | Arduino Compatible
245,00 EGP- NPN Normally Open (NO) magnetic switch
- 3-wire connection: VCC, GND, Output
- Wide voltage range: 4.5V–30V DC
- Built-in LED indicator for magnetic detection
- Fast, non-contact sensing
- Compatible with Arduino and other microcontrollers
- Durable and compact M12 threaded design
NRF24L01 Wireless Module With Antenna
325,00 EGP- 2.4GHz transceiver for wireless data
- Long range with external antenna
- Low power, SPI interface
- Ideal for IoT, Arduino, wireless sensors
Omnidirectional Microphone Module (I2S Interface)
190,00 EGP- 🎙️ Omnidirectional I2S microphone module for digital audio capture
- 📡 I2S interface for clean, noise-resistant signal output
- 🧠 Ideal for voice recognition, recording, and audio sensing
- 🎚️ High sensitivity for clear speech pickup
- 🧩 Works great with ESP32/ESP32-S3, STM32, Raspberry Pi
- 🔋 Low power operation for always-on listening projects
- 📦 Compact module—easy to integrate into enclosures
- ✅ Perfect for smart speakers, IoT voice control, and DIY audio
ON/OFF PCB Switch (6 Pin)
5,00 EGP- 6-pin configuration for secure PCB mounting
- Slim, compact build ideal for confined layouts
- Durable materials ensure long-lasting operation
- Simple installation across various circuit types
- Perfect for prototypes, gadgets, and home electronics
On/Off Switch Black Rocker 10A Small 12V DC (KDC-08)
5,00 EGP- MPN: KDC-08
- Temperature: -25 to 85 degc
- Rated voltage: 250V
- Rated current: 3A-6A-15A
- contact resistance: <=0.02 ohm
- Insulation resistance: >=100Mohm
- withstand voltage: 1500VAC
- lifetime: 10000 cycles
