We use cookies in order to personalize your site experience.
Shop
NJK-5002C Hall Effect Sensor – NPN NO 3-Wire Magnet | Arduino Compatible
245,00 EGP- NPN Normally Open (NO) magnetic switch
- 3-wire connection: VCC, GND, Output
- Wide voltage range: 4.5V–30V DC
- Built-in LED indicator for magnetic detection
- Fast, non-contact sensing
- Compatible with Arduino and other microcontrollers
- Durable and compact M12 threaded design
NRF24L01 Wireless Module With Antenna
325,00 EGP- 2.4GHz transceiver for wireless data
- Long range with external antenna
- Low power, SPI interface
- Ideal for IoT, Arduino, wireless sensors
ON/OFF PCB Switch (6 Pin)
5,00 EGP- 6-pin configuration for secure PCB mounting
- Slim, compact build ideal for confined layouts
- Durable materials ensure long-lasting operation
- Simple installation across various circuit types
- Perfect for prototypes, gadgets, and home electronics
On/Off Switch Black Rocker 10A Small 12V DC (KDC-08)
5,00 EGP- MPN: KDC-08
- Temperature: -25 to 85 degc
- Rated voltage: 250V
- Rated current: 3A-6A-15A
- contact resistance: <=0.02 ohm
- Insulation resistance: >=100Mohm
- withstand voltage: 1500VAC
- lifetime: 10000 cycles
Optical Dust Sensor with Cable – Smoke
350,00 EGP- Infrared optical sensing for accurate particle detection
- Detects dust, smoke, and pollen in indoor environments
- Fast response time (<1 second) and low power use
- Compact build with lightweight materials
- Plug-and-play with included 5-pin interface cable
- Compatible with Arduino, ESP32, STM32, Raspberry Pi
PAM8403 Mini 5V Digital Amplifier Board with Switch Potentiometer can be USB Powered
55,00 EGP-
Based on PAM8403 digital audio amplifier chip for high-fidelity stereo output
-
3W + 3W stereo output with low distortion and efficient power usage
-
Built-in rotary potentiometer with switch for easy volume control and power on/off
-
Compact design: 30mm x 22mm PCB size, 16mm height when assembled
-
Upgraded 470µF power filter capacitor for improved audio clarity and stability
-
Suitable for portable, battery-powered, or DIY audio projects
-
Low power operation (5V) – ideal for long-term stable use
⚠️ Note: Supply voltage must be ≤ 5.5V. Reverse polarity will damage the board.
PCB LINE FR2 (9X15 cm2)
35,00 EGP- Material: Durable FR2 phenolic paper laminate.
- Size: Compact 9×15 cm².
- Copper-Clad: Single-sided for easy soldering.
- Grid Pattern: 2.54 mm (0.1 inch) spacing for standard components.
- Pre-drilled Holes: ~1 mm diameter for through-hole components.
- Versatile Use: Ideal for prototyping, hobby, and educational projects.
PCB LINE IC FR2 (9X15 cm2)
35,00 EGP-
Pre-etched copper tracks for ICs and components
-
Optimized for DIP packages, resistors, and capacitors
-
Made from FR2 phenolic paper – easy to cut and drill
-
9×15 cm² single-layer board for prototyping
-
Standard 2.54mm hole pitch for through-hole components
-
Ideal for educational, DIY, and quick prototyping projects
PCB Single Layer FR2 (10X15 cm2)
25,00 EGP-
Single-sided copper-clad PCB for custom circuit design
-
Made from FR2 phenolic resin – easy to cut, drill, and shape
-
10×15 cm² large size – suitable for bigger prototypes
-
Compatible with manual and chemical etching methods
-
35µm copper thickness for reliable conductivity
-
Ideal for students, hobbyists, and professionals in electronics
Photo Resistor Sensor LDR 5mm GL5549 80kΩ~150kΩ P=3.4mm
6,00 EGP- High sensitivity photoresistor (LDR)
- Fast 30ms response time
- 540nm spectral peak
- 80–150KΩ at 10 Lux light resistance
- 20MΩ dark resistance
- Wide temp range: -30℃ to +70℃
- Epoxy resin sealed for durability
Photocell LDR Sensor Switch (ASO-AS-10) 10A
170,00 EGP-
Dusk-to-dawn automation: LDR turns lights ON at < 30 lux and OFF at > 150 lux
-
Energy saver: Lights run only when needed, cutting power costs
-
10 A load capacity: Drives up to ≈ 2 200 W of resistive lighting at 220 V AC
-
Anti-interference delay: 10–20 s pause stops false triggers (headlights, lightning)
-
Weatherproof IP44 housing: UV-stable polycarbonate for reliable outdoor use
-
Simple 3-wire hook-up: Live in, neutral, and switched live out
PIC16F628A-I/P
100,00 EGP- 8-bit PIC microcontroller with 14-bit instruction set
- Flash memory: 2K words program storage
- RAM: 224 bytes | EEPROM: 128 bytes
- Operating speed: up to 20 MHz
- I/O pins: 16 (with individual direction control)
- Built-in peripherals: USART, CCP, timers, comparators
- Operating voltage: 2.0V – 5.5V
- Package: 18-pin DIP (I/P) for easy prototyping
- Low-power features with sleep mode
PIC16F877A-I/P
220,00 EGP-
8-bit Microchip PIC microcontroller with 14 KB Flash
-
368 Bytes RAM and 256 Bytes EEPROM
-
10-bit 8-channel ADC
-
USART, SPI, I2C communication interfaces
-
Up to 20 MHz clock speed
-
40-pin PDIP package suitable for prototyping
PIC18F452-I/P
350,00 EGP- 8-bit PIC18F core @ 40MHz (10 MIPS)
- 32KB Flash, 1.5KB SRAM, 256B EEPROM
- 10-bit ADC with 8 channels
- SPI, I²C, USART, PWM support
- DIP-40 through-hole package
PICkit3 Debugger Programmer Emulator Controller Development Board
2.200,00 EGP- Full-speed USB support using Windows standard drivers
- Real-time execution
- Processors run at maximum speeds
- Built-in over-voltage/short circuit monitor
- Low voltage to 5V (1.8 to the 5V range)
- Read/write program and data memory of the microcontroller
- Program up to 512K byte flash.
piezo sensor-Gold
30,00 EGP- High Sensitivity: Accurately detects vibrations, pressure, or impacts.
- Gold-Plated Electrodes: Enhanced conductivity and corrosion resistance for reliable performance.
- Wide Frequency Response: Ideal for applications in sound and vibration detection.
- Compact & Durable: Thin, flexible design with long operational life.
- Versatile Use: Suitable for musical instruments, alarms, medical devices, and industrial monitoring.
