Shop
Micro SD Card Reader Module
60,00 EGP- 📁 microSD/microSDHC Support – Works with FAT16/FAT32 file systems.
- 🔌 SPI Communication – Standard 4-pin interface (MISO, MOSI, SCK, CS).
- ⚡ 3.3V Regulator – Accepts 3.3V or 5V power input.
- 🛡️ Level Shifting – Safe for 5V microcontrollers (Arduino, ESP32, etc.).
- 🧩 Compact Design – Fits easily on breadboards and PCBs.
- 🔧 Applications – Ideal for data logging, IoT, media storage, and embedded systems.
Micro Servo SG90 – 0 to 180 Degrees, 1.8 kg.cm, Plastic Gears
95,00 EGP- Model: SG90
- Weight: 9 gm
- Operating voltage: 3.0V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V : 1.6kg-cm
Micro Servo SG90 – 360 Degrees, 1.8 kg.cm, Plastic Gears
100,00 EGP- Full 360° Rotation for applications like small robots, RC wheels, and continuous motion projects.
- Compact & Lightweight design, perfect for tight spaces and lightweight builds.
- Torque of ~1.8 kg·cm at 6 V, suitable for light-duty tasks.
- Plastic Gears & Durable Shell: Economical yet reliable for hobbyist use.
- Standard 5–6 V Input compatible with most microcontroller setups (Arduino, Raspberry Pi).
- Quick, Responsive Control via PWM for smooth motion and positioning.
Microphone 9*7mm
7,00 EGP- Low noise
- Low power consumption
- Frequency Range: 50 – 20KHz
- Microphone sensitivity 56 – 58DB
- Multi-Channel
Mini 5A PWM DC Motor Speed Controller – 3V-35V, 90W Max, LED Dimmer
85,00 EGP- Input Voltage Range: 3V to 35V DC
- Max Output Power: Up to 90W
- Current Capacity: Up to 5A continuous
- PWM Control for precise speed and brightness adjustment
- Compact Design suitable for DC motors, fans, and LED dimming projects
Mini USB LED Lamp – Ultra-Thin & Lightweight for Camping
25,00 EGP- Ultra-thin & ultra-lightweight portable USB lamp
- Powered via standard 5V USB (mobile power, PC, laptop, etc.)
- Features 3× 2835 SMD LEDs, 0.2W ultra-low power
- High luminous efficiency with low heat output
- Working current: ~40mA – long-lasting & energy-saving
- Fits in a wallet or keychain – perfect for travel or camping
- One 5000mAh power bank can light it for ~100 hours
- Ideal for night reading, emergencies, or minimalist lighting setups
MOC3063 Zero-Crossing Optocoupler – 600V Triac Driver for Safe AC Load Control
15,00 EGP- Zero-Crossing Detection – Ensures low-noise switching and reduced EMI
- 600V Peak Voltage Handling – Ideal for switching high-voltage AC loads
- Low Trigger Current – Operates with typical 10mA LED current
- Optical Isolation – Withstands up to 5300V RMS between input and output
- Safe AC Switching – Protects microcontrollers and PLCs from AC surges
- Compact DIP-6 Package – Easy PCB integration and through-hole mounting
- Reliable Load Control – Perfect for lamps, motors, heaters, and industrial systems
- Wide Operating Range – -40°C to +100°C for industrial-grade environments
Monocrystalline 110*136mm 12V 200mA Small Solar Cell
450,00 EGP- 12 volt 2-watt poly crystalline solar panel .
- High conversion speed, high-efficiency output.
- Excellent low light effect.
- High transmittance tempered glass.
- A unique technique to prevent water frozen within the deforming framework.
- Small Epoxy Solar Panels are simple to install or add to your existing product.
Mounting for DC Motor JGA25-370-CE 3D Printed
45,00 EGP-
Designed for 25mm JGA25-370-CE gear motors
-
High-quality PLA/PETG 3D printed construction
-
Pre-drilled 3mm mounting holes
-
Stable, low-profile design (~20mm height)
-
Easy alignment using motor faceplate and side screws
-
Ideal for robotics, pan-tilt, or DIY mechanical projects
MP3-TF-16P SD Card MP3 Module with Serial Port
150,00 EGP- Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
- 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
- Fully supports FAT16, FAT32 file system
- Maximum support 32G TF card
- Support U disk to 32G, 64M bytes of NORFLASH
- A variety of control modes are available. IO control mode, serial mode, AD key control mode
MPU9250 9-Axis Sensor Module – Gyroscope, Accelerometer, and Magnetometer for Robotics, and Wearable Devices
Original price was: 750,00 EGP.725,00 EGPCurrent price is: 725,00 EGP.- Accelerometer, Gyroscope
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- 9 DOF modules
MQ-135 Air Quality/Gas Detector Sensor Module For Arduino
100,00 EGP- Detects multiple gases: NH₃, benzene, alcohol, CO₂, NOₓ, smoke
- Provides analog and digital outputs
- Operates at 5V DC
- Adjustable sensitivity via onboard potentiometer
- Requires preheating (~24 hours) for accurate readings
- Compact and easy to integrate
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
85,00 EGP- Detects smoke, LPG, butane, hydrogen, and other combustible gases
- Provides analog and digital output signals
- Fast response and high sensitivity
- Compatible with Arduino and other microcontrollers
- Easy to calibrate and use in gas leak detection projects
- Operates at 5V power supply
- Ideal for safety and environmental monitoring systems
MQ-5 Gas Sensor Module
80,00 EGP- Detects LPG, methane, natural gas, and propane
- Dual output: analog and digital signals
- Operates at 5V with low power consumption
- Adjustable sensitivity via onboard potentiometer
- Fast response and recovery time
- Compact and easy to integrate
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
75,00 EGP- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
Multicolor 10 pin Dupont Flat Ribbon Cable (1 Meter)
25,00 EGP-
10 Individual Jumper Leads in a flat, ribbon format with 2.54 mm pitch
-
One-Meter Length for flexible routing in electronics projects
-
Multicolor Wires for easy signal identification and organization
-
Female-to-Female Connectors for quick plug-and-play with headers
-
Compatible with Breadboards & Microcontrollers like Arduino, Raspberry Pi
NEO-6M GPS Module with EPROM
450,00 EGP- Based on u-blox NEO-6M GPS chip
- Tracks up to 22 satellites on 50 channels
- High sensitivity: -161 dBm, low power: 45mA
- Built-in 25x25mm ceramic patch antenna
- Default baud rate: 9600
- EEPROM for saving settings & backup battery for faster lock
- TTL UART Interface: TX, RX, VCC, GND
- Supports GPS functions: Position hold, Return-to-Home, Waypoints
- Cold start: 38s, Hot start: 1s
- Compact: 30mm x 23mm module, 3mm mounting holes
- Ideal for drones, robots, navigation projects