Shop
Brand
ATMEGA128 Arduino-Compatible Module with Bootloader (F128B)
480,00 EGP- 🧠 ATmega128 MCU with Arduino-compatible bootloader
- ⚡ 5V logic for easy interfacing with common modules
- 💾 Large memory: 128KB Flash for bigger projects
- 🧮 Extra SRAM & EEPROM for data-heavy applications
- 🔌 Multiple I/O pins for sensors, relays, and peripherals
- 🚌 Built-in UART / SPI / I2C(TWI) for flexible communication
- 🛠️ Easy programming via USB-to-Serial (bootloader upload)
- 📦 Ideal for robotics, automation, and advanced Arduino sketches
ATMEGA328P-AU SMD
150,00 EGP- 🧠 ATmega328P-AU microcontroller in SMD (TQFP) package
- ⚡ Popular MCU used in Arduino Uno/Nano-compatible designs
- 🧩 Ideal for custom PCBs, embedded projects, and prototyping
- 🚌 Supports UART / SPI / I2C(TWI) communication
- ⏱️ Runs up to 20MHz with external crystal support
- 💾 Built-in Flash + SRAM + EEPROM for program & data storage
- 🔌 Works with 3.3V or 5V systems (depending on clock setup)
- 🛠️ Programmable via ISP or bootloader (Arduino environment)
ATMEGA328P-U without bootLoader
220,00 EGP- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
ATMEGA32A-PU “8-bit AVR with 32K Bytes of ISP Flash”
300,00 EGP- 8-bit AVR microcontroller with 32KB ISP Flash
- 2KB SRAM and 1KB EEPROM memory
- Operates up to 16 MHz clock speed
- Rich peripherals: ADC, USART, SPI, I2C
- Low power consumption with multiple sleep modes
- 40-pin PDIP package for easy prototyping
AUX 3.5mm Metal Female Jack Solder Wire Connector
25,00 EGP- 🎧 3.5mm AUX metal female jack connector
- 🧲 Metal body for durability and improved shielding
- 🛠️ Solder-type terminals for secure custom wiring
- 🔊 Stable contact for clean audio with less noise
- 📦 Compact size—ideal for DIY and repair projects
- 🔌 Works with standard 3.5mm male plugs (TRS)
- 🧩 Great for extension leads, panels, and enclosures
- ✅ Perfect for making custom AUX adapters and cables
AUX Metal 3.5mm Male Jack Solder Wire Connector
15,00 EGP- 🎧 3.5mm AUX metal male jack connector
- 🧲 Metal body for durability and better shielding
- 🛠️ Solder-type terminals for secure custom wiring
- 🔊 Clear, stable audio connection with firm contact
- 📦 Compact design—great for DIY cables and repairs
- 🔌 Universal compatibility with 3.5mm audio ports
- 🧩 Ideal for headphones, speakers, mixers, and modules
- ✅ Perfect for making custom AUX leads and adapters
AVR Development Kit Eta32Mini Based on ATMEGA32 – Fares PCB
1.100,00 EGP- 🧠 ATmega32-based mini AVR development board
- ⚡ Perfect for learning AVR and embedded C projects
- 🔌 On-board essentials for quick prototyping
- 🧩 Easy access to I/O pins for sensors and modules
- 🚌 Supports common interfaces: UART / SPI / I2C(TWI)
- 🛠️ Programmable via standard AVR programmers (ISP)
- 📦 Compact “mini” form factor for breadboard-friendly setups
- 🤖 Ideal for robotics, automation, and control applications
Battery 9V Panasonic
30,00 EGP- 🔋 Panasonic 9V battery for reliable everyday power
- ⚡ Stable output for low-to-medium drain devices
- 🧠 Ideal for smoke alarms, multimeters, toys, and remotes
- 🔌 Standard 9V snap terminals for quick, secure connection
- ⏳ Long shelf life—great for standby applications
- 🛡️ Leak-resistant construction for safer storage
- 📦 Compact design fits standard 9V battery compartments
- ✅ Genuine Panasonic quality for consistent performance
Battery 9v Veko
45,00 EGP- 🔋 Veko 9V battery for everyday electronics
- ⚡ Stable power for low-to-medium drain devices
- 🧠 Ideal for smoke alarms, remotes, toys, and multimeters
- 🔌 Standard 9V snap terminals for quick connection
- ⏳ Good shelf life for standby devices
- 📦 Compact rectangular design—easy to carry and store
- 🛡️ Reliable performance with leak-resistant build
- ✅ Easy replacement for standard 9V battery applications
Battery Charger 2 Cell For 18650 Battery
95,00 EGP- Charges 1–2 × 18650 Li-ion batteries simultaneously
- Independent slots with CC/CV charging
- LED indicators for charging/full status
- Built-in safety protections (overcharge, short-circuit, reverse polarity)
- Compact and lightweight for portability
- Input: AC 100–240V or DC 5V (USB, model dependent)
- Output: 4.2V per slot, ~500–1000mA charging current
Battery Charger for 18650 Li-ion 1 Cell YH-07
50,00 EGP-
Designed for 1×18650 Li-ion battery (3.7V)
-
Compact and portable charging dock
-
LED indicators: Red (charging), Green (fully charged)
-
Built-in protection: overcharge, short-circuit, reverse polarity
-
USB-powered – compatible with wall adapters, laptops, power banks
-
Ideal for flashlights, DIY projects, and battery testing
Battery Holder ( 1 x 18650 ) (3.7v)
12,00 EGP- 🔹 Holds 1 x 18650 battery (3.7V)
- 🔧 Pre-soldered leads for easy connection
- 🧱 Made of high-quality plastic
- 🛠️ Easy to install and use
- ⚠️ Compatible with standard 18650 batteries (not included)
