Shop
DC Geared Motor Dual Shaft 3:12VDC 450RPM
30,00 EGP- Dual-shaft design for wheels, pulleys, or encoders
- High torque with built-in gearbox
- Smooth operation from 3V to 12V DC
- ~450 RPM at 12V for balanced speed and power
- Compact size for easy project integration
- Ideal for robots, automation, and DIY mechanisms
DC Input Module 5V with DC Jack and Switch for Breadboard
40,00 EGP-
Accepts 5V DC input via standard 5.5×2.1mm barrel jack
-
Built-in ON/OFF toggle switch for power control
-
Plugs directly into standard 400- or 830-point breadboards
-
Provides regulated 5V output to breadboard power rails
-
Compact and plug-and-play design for quick setup
-
Ideal for Arduino, ESP, sensors, and prototyping applications
DC Motor 5V
15,00 EGP-
Rated for 5V operation (works from 3V to 6V)
-
Compact brushed motor – fits in tight spaces
-
High RPM (~12000 at 5V) for dynamic mechanical tasks
-
Compatible with wheels, gears, pulleys, and more
-
Easily controlled using H-bridge or motor driver modules
-
Ideal for DIY projects, robotics, fans, and educational kits
DC Motor R280 3-12V 13750RPM
50,00 EGP- Wide voltage range – operates from 3V to 12V DC
- High-speed output – up to 13,750 RPM @ 12V
- Compact body – ~24mm diameter, ~30mm length
- Brushed DC motor – simple, efficient, and easy to drive
- Standard face-mount holes – quick and secure installation
- Ideal for toys & fans – perfect for hobby and prototyping use
- Great for robotics & models – reliable performance in small builds
- Low power and lightweight – excellent for battery-powered projects
DC-022 Panel Mount DC Power Jack Socket (5.5mm x 2.1mm Female)
7,00 EGP- Panel-mount DC power jack for 5.5×2.1mm plugs
- Threaded body with hex nut for secure installation
- Three solder terminals including switched contact
- Rated up to 30V DC, 0.5–1A current (variants up to 5A)
- Durable thermoplastic housing and metal contacts
- Ideal for DIY electronics, LED lighting, audio gear, and repairs
DC-DC Boster MT3608 3V~28Vdc Adjustable Step-Up Converter Module 2A Type C USB
40,00 EGP-
Boosts low DC voltage to higher adjustable output
-
USB Type-C input for easy connectivity
-
Compact and lightweight module
-
High efficiency and stable performance
-
Built-in over-temperature and short-circuit protection
-
Ideal for battery-powered projects and portable electronics
DC-DC Step-Up Power Converter Module XL6009
65,00 EGP- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v;
Desoldering Pump
45,00 EGP-
Efficient manual solder removal for electronics
-
Spring-loaded plunger for quick operation
-
Durable plastic or aluminum body (model dependent)
-
Compact and lightweight handheld design
-
Anti-static safe – suitable for sensitive components
-
Reusable and easy to clean
-
Ideal for DIY repair, prototyping, and soldering practice
DHT11 Temperature And Humidity Sensor Module with LED
60,00 EGP- 📦 DHT11 sensor on PCB with LED indicator
- 🔌 Operates on 3–5V, 4-pin header (0.1″ spacing)
- 🔧 Built-in pull-up resistor (4.7K or 10K)
- 💧 Humidity: 20–80% (±5%)
- 🌡️ Temp: 0–50°C (±2°C)
- 🔋 Low power use: max 2.5mA during conversion
DHT22 Digital Temperature & Humidity Sensor Module for Arduino DIY Projects Black module
210,00 EGP- 🌡️ Measures temperature and humidity
- 📏 High accuracy (±0.5°C, ±2–5% RH)
- 🧪 Calibrated digital output
- 🔧 No external components needed
- ⚡ Low power consumption
- 🔁 1 reading every 2 seconds
- 🔌 Long-distance signal transmission
- 🧠 Fully factory calibrated and compensated
DHT22 Digital Temperature & Humidity Sensor Module for Arduino DIY Projects Red module
210,00 EGP- 6-pin ON/OFF switch for PCB mounting
- Compact design for tight spaces
- Reliable and durable construction
- Easy to integrate into various circuits
- Ideal for DIY and electronic applications
DIY Acrylic Robot Arm Kit (not-including Servo and Board)
Original price was: 400,00 EGP.350,00 EGPCurrent price is: 350,00 EGP.- Material: Acrylic
- Affordable 4-DOF manipulators.
- Highly versatile mechanical parts.
- Wood board laser cutting with precision.
- Easy to assemble.
DIY Metal Detector Kit: DC 3V-5V 60mm Non-Contact Sensor Module
150,00 EGP-
Complete DIY kit for building a basic metal detector
-
Includes all required electronic components and PCB
-
Built-in detection coil integrated on the high-quality PCB
-
Component values and positions clearly marked on the board
-
Ideal for learning electronics, experimentation, and STEM projects
-
Suitable for applications like security checks, object detection, and fun DIY builds
-
Compact and easy to assemble – great for beginners and hobbyists
DIY Mini Electric Boost Kit – 1000KV Step-Up
- Complete bundle: booster, charger, battery, holder & switch
- 1000KV step-up for efficient voltage boost
- TP4056 charger with overcharge/short circuit protection
- Compact and lightweight for easy integration
- Great for DIY electronics and robotics
DIY PVC Water Pump Hose 6x8mm – Clear Vinyl Tubing (1m)
15,00 EGP- Material: High-quality clear PVC.
- Size: 6mm inner diameter, 8mm outer diameter.
- Length: 1 meter.
- Flexible & Durable: Easy to bend and long-lasting.
- Applications: Water pumps, aquariums, irrigation, DIY projects.
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
Original price was: 550,00 EGP.525,00 EGPCurrent price is: 525,00 EGP.- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
- Path resistance: 16 mΩ at 25°C.
- Low quiescent current: 7 µA at 25°C.
DPDT Push Button Self-Locking Switch 8.5×8.5mm, 6-Pin Double Row
5,00 EGP- Self-locking mechanism – press to lock, press again to release
- DPDT switching – controls two circuits at once (ON-ON)
- Compact 8.5mm × 8.5mm size – fits tight PCB layouts
- 6-pin double row layout – easy through-hole mounting
- Tactile feedback – responsive and durable switching
- Rated for low-voltage DC – ideal for 12V–24V control logic
- Perfect for panels & DIY – great for toggling power or modes
- 2.54mm pin pitch – standard spacing for breadboards & PCBs
