- تكلفه فاتورة الكهرباء
- Electrical Energy Consumption
- Parallel and Series Resistor Calculator
- LED Resistor Calculator
- UPS Battery Backup Calculator
- Voltage Divider Calculator
- Resistor Color Code Calculator
- Ohm’s Law Calculator
- Current Divider Calculator
- Number System Conversion Calculator
- Boost Converter Calculator
- MOSFET Threshold Voltage Calculator
- Apparent Power Calculator (kVA & VA)
- 555 Timer Calculator
- Buck Converter Calculator
- Capacitors in Series or Parallel Calculator
- Low Pass Filter Calculator
- RMS Voltage Calculator
- Universal Data Converter
- RMS Voltage Calculator
- Capacitor Code Converter
- Series Inductors Calculator
Fast delivery within 24 to 72 Hours
ESC 30A Brushless Speed Controller
475,00 EGP
In stock
30A continuous / 40A burst current
Supports 2–4S LiPo or 5–12 cell NiMH/NiCd
Built-in 5V/2A BEC
Pre-soldered T-type (Deans) and 3.5mm bullet connectors
Programmable brake, timing, and voltage cutoff
Overheat, signal loss, and low voltage protection
Smooth throttle response and easy calibration
In stock
Shipping & Delivery
Receipt from the place on the same day or shipping to nearby places
On the same day
6PM - 10 PM
Delivery through a fast shipping company intermediary
1-3 Days
Frequently Bought Together
ESC 30A Brushless Speed Controller
475,00 EGPServo Tester (3CH 4.8-6V)
110,00 EGPDescription
Description:
This 30A Electronic Speed Controller (ESC) is designed to provide reliable and efficient power control for brushless DC motors in a variety of RC (Radio Control) applications. It's an essential component for RC airplanes, multirotors (drones), helicopters, and some smaller RC cars or boats. Featuring a pre-soldered T-Type (Deans compatible) battery connector for secure power input and 3.5mm bullet connectors for easy motor connection, this ESC is ready for quick installation. It typically includes a built-in BEC (Battery Eliminator Circuit) to power your receiver and servos directly from the main flight battery, simplifying your wiring setup. With programmable settings and multiple protection features, this ESC offers a balance of performance, safety, and ease of use for hobbyists.
Short Specifications:
Continuous Current: 30A
Burst Current: 40A (for up to 10 seconds)
Input Voltage: 2-4S LiPo (Lithium Polymer) / 5-12 cells NiMH/NiCd
BEC Output: 5V / 2A (Typical, may be Linear or Switching depending on specific model)
Battery Connector: T-Type (Deans Compatible), pre-soldered
Motor Connectors: 3 x 3.5mm Female Bullet Connectors, pre-soldered
Programming: Yes (Typically via transmitter stick movements or optional programming card)
Dimensions: (Varies, e.g., approx. 45mm x 24mm x 11mm – excluding wires)
Weight: (Varies, e.g., approx. 25g – including wires and connectors)
Features:
Reliable Performance: Delivers consistent power output for smooth motor operation.
Pre-Soldered Connectors: Comes with a T-Type battery connector and 3.5mm motor bullet connectors installed for convenient plug-and-play setup.
Built-in BEC: Provides regulated 5V power to the RC receiver and servos, eliminating the need for a separate receiver battery.
Programmable Settings: Allows customization of parameters such as:
Brake (On/Off)
Battery Type (LiPo / NiMH)
Low Voltage Cutoff (LVC) Mode & Threshold
Timing Settings (to optimize for different motor types)
Start Mode (Soft / Normal / Very Soft)
Multiple Protection Features:
Low Voltage Cutoff Protection: Prevents over-discharge of LiPo batteries.
Over-Heat Protection: Reduces power output or shuts down if ESC temperature gets too high.
Throttle Signal Loss Protection: Safely shuts down the motor if the radio signal is lost.
Smooth & Linear Throttle Response: Ensures precise control over motor speed.
High-Efficiency MOSFETs: Utilizes quality components for better efficiency and reduced heat generation.
Easy Throttle Range Calibration: Simple procedure to match the ESC to your transmitter's throttle range for optimal performance.
Compact & Lightweight Design: Suitable for applications where space and weight are considerations.
Customer Reviews
Specification
Overview
Weight Weight | 0,0000 g |
---|---|
![]() | 45 × 24 × 11 mm |
Specification
continuous-current |
30A |
---|---|
burst-current |
40A (≤10s) |
input-voltage |
2–4S LiPo / 5–12S NiMH/NiCd |
bec-output |
5V / 2A |
battery-connector |
T-Type (Deans compatible), pre-soldered |
motor-connectors |
3 x 3.5mm bullet connectors, pre-soldered |
programmable |
Yes (via transmitter or programming card) |