DHT11 Temperature And Humidity Sensor Module with LED
- 📦 DHT11 sensor on PCB with LED indicator
- 🔌 Operates on 3–5V, 4-pin header (0.1″ spacing)
- 🔧 Built-in pull-up resistor (4.7K or 10K)
- 💧 Humidity: 20–80% (±5%)
- 🌡️ Temp: 0–50°C (±2°C)
- 🔋 Low power use: max 2.5mA during conversion
60,00 EGP
7
People watching this product now!
Payment Methods:
Description
The DHT11 Temperature And Humidity Sensor Module with LED is a small humidity and temperature sensor that you can connect to your Arduino and get readings for temperature and humidity in the environment.
Features:
- DHT11 sensor with PCB and LED indicator along with cable; 3 to 5V power and I/O, 4 pins with 0.1″ spacing
- The board has pre-built 4.7K or 10K resistor, which you will need to use as a pull-up from the data pin to VCC.
- 2.5mA max current use during conversion (while requesting data)
- Good for 20-80% humidity readings with 5% accuracy
- Good for 0-50°C temperature readings ±2°C accuracy.
Package Includes:
- 1 x DHT11 Temperature And Humidity Sensor Module.
- 3 x Female to Female Connecting cable.
Specification
General
| WeightWeight | 0,0000 g |
|---|---|
| Sensor Type | DHT11 |
| Measured Parameters | Temperature & Humidity |
| Interface | Digital output |
| Operating Voltage | 3.3–5V DC |
| Material | PCB with electronic components |
| Features | Built-in LED indicator |
| Usage | Weather monitoring, Arduino/Raspberry Pi projects, DIY electronics |
