Temperature & Humidity Sensor
AHT10 High Precision Digital Temperature And Humidity Measurement Module
180,00 EGP- Interface type: I2C
- Working voltage: 1.8 – 6.0 V
- Interface size: 4*2.54mm pitch
- Humidity accuracy: typical ± 2%
- Humidity resolution: 0.024%
- Temperature accuracy: typical ± 0.3 ° C
DHT11 Temperature And Humidity Sensor Module with LED
60,00 EGP- 📦 DHT11 sensor on PCB with LED indicator
- 🔌 Operates on 3–5V, 4-pin header (0.1″ spacing)
- 🔧 Built-in pull-up resistor (4.7K or 10K)
- 💧 Humidity: 20–80% (±5%)
- 🌡️ Temp: 0–50°C (±2°C)
- 🔋 Low power use: max 2.5mA during conversion
DHT22 Digital Temperature & Humidity Sensor Module for Arduino DIY Projects Black module
210,00 EGP- 🌡️ Measures temperature and humidity
- 📏 High accuracy (±0.5°C, ±2–5% RH)
- 🧪 Calibrated digital output
- 🔧 No external components needed
- ⚡ Low power consumption
- 🔁 1 reading every 2 seconds
- 🔌 Long-distance signal transmission
- 🧠 Fully factory calibrated and compensated
DHT22 Digital Temperature & Humidity Sensor Module for Arduino DIY Projects Red module
210,00 EGP- 6-pin ON/OFF switch for PCB mounting
- Compact design for tight spaces
- Reliable and durable construction
- Easy to integrate into various circuits
- Ideal for DIY and electronic applications
DS18B20 Temperature Sensor
45,00 EGP- Digital temperature sensor with 1-wire interface
- Measures temperatures from –55°C to +125°C
- High accuracy ±0.5°C over a wide range
- Requires only one data line for communication
- Can connect multiple sensors on a single bus
- Waterproof versions available for outdoor use
- Compatible with Arduino, Raspberry Pi, and other microcontrollers
DS18B20 Water Proof Temperature Probe – Black (1m)
80,00 EGP- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 mm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
GY-213V HDC1080 Digital Humidity
150,00 EGP- High accuracy and stability for humidity measurement
- Low power consumption, suitable for battery-operated devices
- Easy integration with various microcontrollers via I2C interface
- Compact size for easy embedding in different applications
- Built-in temperature compensation for accurate humidity readings
KY-028 Digital Temperature Module
45,00 EGP- Power supply: 3 – 5V
- Good sensitivity
- The output format: Digital switching output (0 and 1)
- The comparator output signal is clean, good waveform, driving ability, more than 15mA.
- A fixed bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
LM35DZ Temperature Sensor
125,00 EGP- Measures temperatures from 0°C to 100°C with ±0.5°C accuracy
- Delivers linear output (10mV/°C) for easy data processing
- Low power draw (≈60 µA) for efficient systems
- Compact TO-92 form factor simplifies integration
- Trusted performance from CHINAEES manufacturing
LM35DZ Temperature Sensor Chinese
75,00 EGP- 🎯 Calibrated in Celsius (°C)
- 📏 10.0 mV/°C linear output
- ✅ ±0.5°C accuracy at 25°C
- 🔋 Operating voltage: 4V–30V
- 🔌 Ultra-low current: <60 µA
- 🔥 Low self-heating: 0.08°C
- 🧪 Minimal non-linearity: 0.25°C
- 📤 Low output impedance: 0.1Ω
MAX6675 Module + K Type Thermocouple Sensor Measure 1024°C Temperature
250,00 EGP- Internal integrated cold junction compensation circuit;
- With a simple three serial SPI interface;
- Temperature signal can be converted into 12-bit digital
- Embedded thermocouple break detection circuitry.
- High impedance differential inputs.
- Operating Voltage(VDC): 3 to 5.5
- Temperature Range(°C): 0 to +1024
- Cold Junction Compensation Range(°C): -20 to +80
MAX6675 Thermocouple Sensor Module
200,00 EGP- 🌡️ MAX6675 thermocouple sensor module for K-type probes
- 🔥 Measures high temperatures with stable digital conversion
- 🚌 SPI interface for easy connection to microcontrollers
- ⚡ Works great with Arduino, ESP32, STM32, Raspberry Pi
- 🧩 Ideal for ovens, heaters, 3D printers, and temperature control
- 📈 Cold-junction compensation for better accuracy
- 🛠️ Simple wiring: VCC, GND, SCK, CS, SO
- ✅ Great choice for DIY thermostats and monitoring systems
