Shop
Optical Dust Sensor with Cable – Smoke
350,00 EGP- Infrared optical sensing for accurate particle detection
- Detects dust, smoke, and pollen in indoor environments
- Fast response time (<1 second) and low power use
- Compact build with lightweight materials
- Plug-and-play with included 5-pin interface cable
- Compatible with Arduino, ESP32, STM32, Raspberry Pi
Original LG 5V 2A Charger Adapter – Single Jack – Like New
75,00 EGP- 🔌 Original LG charger adapter with single USB output
- ⚡ Output: 5V / 2A for fast, stable charging
- 📱 Compatible with phones, power banks, and USB devices
- 🛡️ Built-in protection: over-current / over-voltage / short-circuit
- 🔥 Safe, reliable performance for daily use
- 📦 Single jack design—simple and compact
- ✨ Like new condition—clean and well maintained
- ✅ Great replacement or spare charger for home/office
PAM8403 Mini 5V Digital Amplifier Board with Switch Potentiometer can be USB Powered
55,00 EGP-
Based on PAM8403 digital audio amplifier chip for high-fidelity stereo output
-
3W + 3W stereo output with low distortion and efficient power usage
-
Built-in rotary potentiometer with switch for easy volume control and power on/off
-
Compact design: 30mm x 22mm PCB size, 16mm height when assembled
-
Upgraded 470µF power filter capacitor for improved audio clarity and stability
-
Suitable for portable, battery-powered, or DIY audio projects
-
Low power operation (5V) – ideal for long-term stable use
⚠️ Note: Supply voltage must be ≤ 5.5V. Reverse polarity will damage the board.
Panasonic 3V Lithium Battery CR1220
22,00 EGP- 🔋 Panasonic 3V lithium coin cell (CR1220)
- ⚡ Stable, reliable power for compact electronics
- 📏 Small size: 12mm × 2.0mm
- 🧠 Ideal for key fobs, watches, calculators, and sensors
- ⏳ Long shelf life—perfect for standby/backup use
- 🛡️ Leak-resistant design for safe storage and performance
- ❄️ Performs well across wide temperature ranges
- ✅ Genuine Panasonic quality for consistent output
Panasonic 3V Lithium Battery CR2016
16,00 EGP- 🔋 Panasonic 3V lithium coin cell (CR2016)
- ⚡ Stable, dependable 3V output for small devices
- 📏 Compact size: 20mm × 1.6mm
- ⏳ Long shelf life—great for standby and backup power
- 🛡️ Leak-resistant design for safer storage and reliability
- 🧠 Ideal for key fobs, remotes, calculators, and sensors
- ❄️ Performs well across wide temperature ranges
- ✅ Genuine Panasonic quality for consistent performance
Panasonic 3V Lithium Battery CR2025
16,00 EGP- 🔋 Panasonic 3V lithium coin cell (CR2025)
- ⚡ Stable, reliable power for everyday electronics
- 📏 Standard size: 20mm × 2.5mm
- ⏳ Long shelf life—great for standby devices
- 🛡️ Leak-resistant design for safer storage and use
- 🧠 Ideal for key fobs, scales, calculators, and sensors
- ❄️ Performs well across wide temperature ranges
- ✅ Genuine Panasonic quality for consistent performance
Panasonic 3V Lithium Battery CR2032
16,00 EGP- 🔋 Panasonic 3V lithium coin cell (CR2032)
- ⚡ Stable, dependable power for long-term use
- 📏 Standard size: 20mm × 3.2mm
- ⏳ Long shelf life—great for backup/standby devices
- 🛡️ Leak-resistant design for safer storage and reliability
- 🧠 Ideal for CMOS/BIOS, key fobs, remotes, and IoT sensors
- ❄️ Performs well across wide temperature ranges
- ✅ Genuine Panasonic quality for consistent performance
Panda+ ARM Development & Training Kit Based on STM32F401RCT6 (Cortex-M4)
1.550,00 EGP- STM32F401 Cortex-M4 based kit
- Complete all-in-one ARM training platform
- Multiple displays, keypad, relays & I/O
- Ideal for education and professional training
PCB board Line FR2 7X9 cm2
20,00 EGP- 🟤 FR2 PCB prototyping board (stripboard / line board)
- 📏 Size: 7 × 9 cm for compact DIY circuits
- 🔩 Copper strip tracks for quick soldering without etching
- 🛠️ Easy to cut tracks to create custom connections
- 🧩 Ideal for prototypes, repairs, and small electronics projects
- 📦 FR2 phenolic material—lightweight and cost-effective
- 🔌 Works great with through-hole components
- ✅ Perfect for Arduino modules and general circuit building
PCB Bread Board Shape FR2 (4.8×13.3cm2)
28,00 EGP- 🟤 FR2 PCB breadboard-shape prototyping board
- 📏 Size: 4.8 × 13.3 cm
- 🕳️ Universal hole grid for flexible component placement
- 🛠️ Easy soldering for through-hole components
- 🧩 Great for Arduino modules, sensors, and DIY circuits
- 📦 FR2 phenolic material—lightweight and cost-effective
- 🔩 Helps build permanent versions of breadboard prototypes
- ✅ Ideal for repairs, experiments, and electronics learning
PCB LINE FR2 (9X15 cm2)
19,00 EGP- Material: Durable FR2 phenolic paper laminate.
- Size: Compact 9×15 cm².
- Copper-Clad: Single-sided for easy soldering.
- Grid Pattern: 2.54 mm (0.1 inch) spacing for standard components.
- Pre-drilled Holes: ~1 mm diameter for through-hole components.
- Versatile Use: Ideal for prototyping, hobby, and educational projects.
PCB LINE IC FR2 (9X15 cm2)
30,00 EGP-
Pre-etched copper tracks for ICs and components
-
Optimized for DIP packages, resistors, and capacitors
-
Made from FR2 phenolic paper – easy to cut and drill
-
9×15 cm² single-layer board for prototyping
-
Standard 2.54mm hole pitch for through-hole components
-
Ideal for educational, DIY, and quick prototyping projects
PCB Single Layer FR2 (10X15 cm2)
25,00 EGP-
Single-sided copper-clad PCB for custom circuit design
-
Made from FR2 phenolic resin – easy to cut, drill, and shape
-
10×15 cm² large size – suitable for bigger prototypes
-
Compatible with manual and chemical etching methods
-
35µm copper thickness for reliable conductivity
-
Ideal for students, hobbyists, and professionals in electronics
PCF8563T Real Time Clock (RTC) Module
60,00 EGP- ⏰ PCF8563T real-time clock (RTC) module
- 🕒 Keeps accurate time/date with backup battery support
- 🚌 I2C interface for easy connection to microcontrollers
- 🔋 Low power consumption—great for always-on timekeeping
- ⏱️ Includes alarm and timer functions (chip feature)
- 🧩 Ideal for data loggers, clocks, schedulers, and IoT devices
- 🛠️ Compact module—breadboard friendly integration
- ✅ Works well with Arduino, ESP32, STM32, Raspberry Pi
Perforated holes PCB 13.3 * 4.8CM universal circuit board
25,00 EGP- 🟩 Universal perforated PCB board (through-hole)
- 📏 Size: 13.3 × 4.8 cm for slim projects
- 🕳️ Perforated hole grid for flexible component placement
- 🛠️ Easy soldering for DIY circuits and prototypes
- 🧩 Ideal for Arduino modules, sensors, and small projects
- 🔩 Great for building custom circuits without making a PCB
- 📦 Durable board for long-term prototype use
- ✅ Perfect for repairs, experiments, and electronics learning
PHILIPS Battery 6F22L1B/97 9V (Carton Card)
50,00 EGP- Battery Type: 9V Zinc Chloride (ZnC)
- Voltage: 9 Volts
- Shelf Life: Up to 3 years
- Heavy Metal-Free: Contains 0% harmful heavy metals (Cadmium and Mercury free)
- Packaging: Retail pack, single piece per pack
- Form Factor: Prismatic (commonly known as PP3 or 6F22)
- Color Coding: Easy identification with Philips’ color-coded packaging
Photo Resistor Sensor LDR 5mm GL5549 80kΩ~150kΩ P=3.4mm
6,00 EGP- High sensitivity photoresistor (LDR)
- Fast 30ms response time
- 540nm spectral peak
- 80–150KΩ at 10 Lux light resistance
- 20MΩ dark resistance
- Wide temp range: -30℃ to +70℃
- Epoxy resin sealed for durability
Photocell LDR Sensor Switch (ASO-AS-10) 10A
170,00 EGP-
Dusk-to-dawn automation: LDR turns lights ON at < 30 lux and OFF at > 150 lux
-
Energy saver: Lights run only when needed, cutting power costs
-
10 A load capacity: Drives up to ≈ 2 200 W of resistive lighting at 220 V AC
-
Anti-interference delay: 10–20 s pause stops false triggers (headlights, lightning)
-
Weatherproof IP44 housing: UV-stable polycarbonate for reliable outdoor use
-
Simple 3-wire hook-up: Live in, neutral, and switched live out
PIC16F628A-I/P
100,00 EGP- 8-bit PIC microcontroller with 14-bit instruction set
- Flash memory: 2K words program storage
- RAM: 224 bytes | EEPROM: 128 bytes
- Operating speed: up to 20 MHz
- I/O pins: 16 (with individual direction control)
- Built-in peripherals: USART, CCP, timers, comparators
- Operating voltage: 2.0V – 5.5V
- Package: 18-pin DIP (I/P) for easy prototyping
- Low-power features with sleep mode
PIC16F877A-I/P
220,00 EGP-
8-bit Microchip PIC microcontroller with 14 KB Flash
-
368 Bytes RAM and 256 Bytes EEPROM
-
10-bit 8-channel ADC
-
USART, SPI, I2C communication interfaces
-
Up to 20 MHz clock speed
-
40-pin PDIP package suitable for prototyping
